IBM 3274 51C Maintenance Information page 75

B C
1 1
003
Map AlSO, Installation/
Customization Problems
PAGE 2 OF 7
Is the problem a failure to communicate with the Host
System after a successfull customization and 1M U
Y N
004
Go to subsystem problem isolation Chapter 2, step
1
C.
005
o
It is possible that the diskette configuration information is
incorrect and is causing the Host System to fail. Perform the
modification procedure of the Planning. Set-Up and
Customizing Guide for displaying the configuration
information and verify against 3274 customizing procedure
form. See
·B·
o
Perform' concurent test/2' procedure for displaying
configuration table from the system diskette. This table
contains the configuration options and if neccessary use table
to verify that system attachment is correct. SEE CE
Reference Summary SY23-0207 or M.C.M. SY27-2528 for
/2 test information.
o
Go to subsystem problem isolation Chapter 2. Step 1 C.
006
Does the problem occur after diskette customization when an
1M L is performed 7 See ·C·
Y N
007
After the IML of the feature diskette, do the 8421
indicators display a code of 0001 7 See ·C·
Y N
3·48
MAP A150-2
·C·
This question refers to a step procedure when performing the
initial customizing procedure in the Planning and Set-Up Guide.