Sony Cyber-shot DSC-T110 Handbook page 119

Calibration
Enables you to perform calibration when the touch panel buttons do not react at the appropriate
points where you touch.
1 t (Settings) t
t [Calibration]
2 Using the paint pen, touch the center of the ×
mark displayed on the screen in order.
Notes
• If you touch [Cancel] to stop calibration mid-way, any adjustments made up to that point are not applied.
• If you fail to touch the right spot, the calibration is not performed. Touch the center of the × mark again.
(Main Settings)
119 GB