Sony Cyber-shot DSC-T110 Handbook page 118

Notes
• When you use a new Eye-Fi card for the first time, copy the install file of the PC application written in
the Eye-Fi card first, then format the card.
• Before using the Eye-Fi card, upgrade the firmware of the Eye-Fi card to the latest version. For details on
version upgrades, refer to the operating instructions supplied with the Eye-Fi card.
• When uploading image data, [Power Save] is not available.
• If the (error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of the camera
off and on again. If the
contact Eye-Fi, Inc.
• Wireless LAN communication may be interrupted by the other communication devices. If data reception
is insufficient, move the camera closer to the access point.
• For details on content that can be uploaded, refer to the operating instructions supplied with the Eye-Fi
card.
• Some Eye-Fi cards have an "Endless Memory Mode." This product does not support "Endless Memory
Mode." Make sure that Eye-Fi cards that you insert into this product have "Endless Memory Mode"
turned off. For details on setting "Endless Memory Mode", refer to the operating instructions supplied
with the Eye-Fi card.
(error) icon is still displayed, the Eye-Fi card may be corrupted. For details,
118 GB