Indicator Description - Huawei HG8010 series Quick Start Manual

Indicator Description

Table 1 Indicator status description 1
Indicator
CATV
TEL1–TEL2
LAN1–LAN4
LOS/PON
POWER
Table 2 Indicator status description 2
Status
No.
PON
1 Off
Blinks twice
2
a second
3 Steady on
4 Off
Blinks twice
5
a second
Status
Steady on
Off
Steady on
Blinks twice a
second
Blinks once two
seconds
Off
Steady on
Blinking
Off
See Table 2.
Steady green
Steady yellow
Off
Status
LOS
Off
Off
Off
Blinks once
two seconds
Blinks twice a
second
Description
The CATV function is enabled and CATV signals
are received.
The CATV function is disabled or CATV signals
are not received.
The connection between the TEL port and the
voice server is set up.
The connection between the TEL port and the
voice server is set up and the phone is in the off-
hook or ringing state.
The TEL port is registering with the voice server.
The connection between the TEL port and the
voice server is not set up.
The Ethernet connection is in the normal state.
Data is being transmitted on the Ethernet port.
The Ethernet connection is not set up.
The terminal is powered on.
The backup battery is supplying power.
The power supply is cut off.
The GPON terminal is disabled by the
upper-layer device.
The GPON terminal attempts to set up a
connection with its upper-layer device.
A connection is set up between the GPON
terminal and its upper-layer device.
The Rx optical power of the GPON terminal
is lower than the optical receiver sensitivity.
The GPON terminal is a rogue terminal,
contact the service provider for help.
7
Description