Huawei HG8010 series Quick Start Manual page 6

Mounting a GPON terminal onto the wall
Step 1 Mark the positions of two holes (with a spacing listed in the following table) used
for mounting a GPON terminal.
Step 2 Select a proper drill according to the outer diameter of the screws. Use a
hammer drill to drill the marked positions on the wall. Then clean the wall and
install two expansion bolts.
Step 3 Use a screwdriver to fasten the screws into the expansion bolts, leaving the heads
of the screws 3 mm over the wall. Then install the GPON terminal to the screws.
4