Huawei HG8010 series Quick Start Manual page 8

Step 1 Use an optical fiber to connect the OPTICAL port on the GPON terminal to the
optical port in the wall.
NOTE
1.The optical connector connected to the OPTICAL port is an SC/APC connector, and the
type of the optical connector connected to the optical port in the wall is determined by practical
conditions.
2.To ensure normal use of fibers, make sure that the fiber bend radius is larger than
30 mm.
Step 2 Use a coaxial cable to connect the CATV port to a TV set or set top box (STB).
Step 3 Use a network cable to connect the LAN port to a PC or the Ethernet port on
the IP STB.
Step 4 Use a phone line to connect the TEL port to a phone or fax machine.
Step 5 Use a power adapter to connect the POWER port to the power socket.
NOTE
The preceding figure connects the power adapter as an example. For details about how to
use the backup battery unit, see the usage guide to the backup battery.
Step 6 Press the ON/OFF power switch.
Logging in to the Web Configuration Window
Step 1 Set the IP address of the PC in the same subnet as the management IP address
of the GPON terminal. For example,
-IP address: 192.168.100.100
-Subnet mask: 255.255.255.0
NOTE
The default management IP address and subnet mask of the GPON terminal are as follows:
-IP address: 192.168.100.1
-Subnet mask: 255.255.255.0
Step 2 Enter the management IP address of the GPON terminal in the address bar of
Internet Explorer and press Enter.
The login window is displayed.
Step 3 In the login window, select your preferred language, enter the user name and
password (default user name is root and default password is admin), and
click Login. After the password is authenticated, the Web configuration window
is displayed.
6