Indicator Description - Huawei OptiXstar HG8145X6-10 Quick Start Manual

Huawei OptiXstar HG8145X6-10
Quick Start for QR code
Indicator
Power
PON/LOS
LAN1-
LAN4
TEL
USB
WLAN
Issue 01 (2023-04-14)
3
Status Description
Steady on The ONT is powered on.
Off The power supply is cut off.
See the following table.
Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted on the Ethernet port.
Off The Ethernet connection is not set up.
Steady on The ONT is registered with the softswitch but no
service flows are transmitted.
Blinks twice a The ONT is registered with the softswitch, and
second data is being transmitted on the port.
Blinks once The ONT fails to be registered with the softswitch.
every 2
seconds
Off The POTS port is disabled.
Steady on The USB port is connected and working in the
host mode, but no data is transmitted.
Blinking Data is being transmitted on the USB port.
Off The system is not powered on or the USB port is
not connected.
Steady on The WLAN function is enabled.
Blinking Data is being transmitted on the WLAN port.
Copyright © Huawei Technologies Co., Ltd.

Indicator Description

3 Indicator Description
6