Sony CCD-TRV98 Operating Instructions (primary manual) Operating Instructions Manual page 53

Changing the menu settings
Icon/item Mode
EDIT z OFF
TBC z ON
TBC stands for "Time Base Corrector".
DNR
z ON
DNR stands for "Digital Noise Reduction".
LCD BRIGHT
LCD B. L. z BRT NORMAL
LCD COLOR
Notes on the SteadyShot function (CCD-TRV68/TRV78/TRV88/TRV98 only)
• The SteadyShot function will not correct excessive camera-shake.
• Attachment of a conversion lens (optional) may influence the SteadyShot function.
• SteadyShot does not operate in the 16:9FULL mode. If you set STEADYSHOT to ON
in the menu settings, the
If you cancel the SteadyShot function (CCD-TRV68/TRV78/TRV88/TRV98 only)
The SteadyShot off indicator
compensation for camera-shake.
In more than 5 minutes after removing the power source
The "EDIT" and "COMMANDER" (CCD-TRV49/TRV78/TRV98 only) items are
returned to their default settings.
The other menu items are held in memory even when the battery is removed.
Note on LCD B.L.
When you use power sources other than the battery pack, "BRIGHT" is automatically
selected.
Meaning
—
ON To minimize picture deterioration when editing
To correct jitter
OFF To not correct jitter. Set TBC to OFF when
playing back a tape on which you have dubbed
over and recorded the signal of a TV game or
similar machine.
To reduce picture noise
OFF To reduce a conspicuous afterimage when the
picture has a lot of movement
—— To adjust the brightness on the LCD screen
with the SEL/PUSH EXEC dial.
To darken
To set the brightness on the LCD screen normal
BRIGHT To brighten the LCD screen
—— To adjust the color on the LCD screen
To reduce intensity
indicator flashes.
appears. Your camcorder prevents excessive
POWER
switch
PLAYER
PLAYER
PLAYER
PLAYER
CAMERA
To lighten
PLAYER
CAMERA
PLAYER
CAMERA
To increase intensity
53