Step 1 Preparing the power supply
Notes
•Prevent metallic objects from coming into contact with the metal parts of the DC plug
of the AC power adaptor. This may cause a short-circuit, damaging the AC power
adaptor.
•Keep the battery pack dry.
•When the battery pack is not to be used for a long time, charge the battery pack fully,
and then use it until it fully discharges again. Do this once a year. Keep the battery
pack in a cool place.
While charging the battery pack, the CHG lamp does not light up in the following
cases
– The battery pack is not installed correctly.
– Something is wrong with the battery pack.
If the power may go off although the battery remaining indicator indicates that
the battery pack has enough power to operate
Charge the battery pack fully again so that the indication on the battery remaining
indicator is correct.
Charging time
Battery pack
NP-F330 (supplied)
NP-F530/F550
NP-F730/F730H/F750
NP-F930/F950
NP-F960
Approximate number of minutes to charge an empty battery pack
Full charge
150
210
300
390
420
13
Need help?
Do you have a question about the CCD-TRV98 Operating Instructions (primary manual) and is the answer not in the manual?