Charging The Battery Pack - Sony CCD-TRV98 Operating Instructions (primary manual) Operating Instructions Manual

Step 1 Preparing the power supply

Charging the battery pack

Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the "InfoLITHIUM" battery pack (L series).
See page 65 for more information about "InfoLITHIUM" battery pack.
(1) Open the DC IN jack cover and connect the AC power adaptor supplied with
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
(4) Set the POWER switch to OFF (CHARGE). Charging begins, and the CHG
When the CHG lamp goes out, the charging is completed.
4
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camcorder.
12
your camcorder to the DC IN jack with the plug's v mark facing up.
lamp lights up.
POWER
2
CHG lamp
1