TH-37PV7F / TH-37PV7P / TH-37PX7B / TH-37PX7E / TH-42PV7F / TH-42PV7P / TH-42PX7B / TH-42PX7E
6.16. Remove the K-Board
1. Remove the S-Board. (See section 6.13.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (DG). (See section 6.4.)
4. Remove the screws (×3
5. Disconnect the connectors (K1) and remove the K-Board.
6.17. Remove the Plasma panel
section from the Cabinet assy
(glass)
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×3
each).
3. Replace the servicing stand and stand the set.
4. Remove the cabinet assy and the plasma panel fastening
screws (×7
).
) and remove the K-Board.
5. For leaving the plasma panel from the cabinet assy, pull the
bottom of the front frame forward, lift, and remove.
6. Remove the spacers and spacer rings (×6
14
).