Contents 1 Documentation 1.1 Associated documentation 1.2 Electronic documentation 2 Required information 2.1 Indication for use 2.2 Operating principle 2.3 Using accessories not supplied by the manufacturer 2.4 Connecting and disconnecting accessories during use 2.5 Repairing or modifying the medical device 2.6 Warranty 2.7 Latest document update 2.8 Date of first CE marking...
Users are asked to keep documentation close at hand for reference when necessary. User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C - Page 3/27...
Page 6
Page 4/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
2.3 Using accessories not supplied by the manufacturer The handpiece is designed to operate with SATELEC, a company of Acteon group dental surgery tips. The use of tips made by other manufacturers will damage the handpiece, break tips and void the warranty. ...
Page 8
Page 6/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
If you have any questions or requirements, contact your supplier. The handpiece includes the following items: a handpiece and its cord; a Quick Start-Clean for the [J87580] handpiece-cord assembly. User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C - Page 7/27...
Page 10
Page 8/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
The Cube LED handpiece should be used in combination with a dental ultrasonic generator and tips for intraoral surgery. Refer to the user manual of the Cube LED J28821 handpiece, and to the protocol for cleaning, disinfecting and sterilising the J12801 handpieces and cord for further information.
Page 12
Page 10/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
12. Check the irrigation parameters depending on the tip chosen. 13. After water drainage, check that the spray works correctly. Your medical device is now ready to use. User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C - Page 11/27...
Page 14
Page 12/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
6.2 Cleaning, disinfecting and sterilising accessories Refer to the cleaning, disinfection and sterilisation instructions for accessories listed in the chapter Associated documentation page 3. User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C - Page 13/27...
Page 16
Page 14/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
Operate the device at minimum power, at maximum irrigation flow rate for two minutes. User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C - Page 15/27...
Page 18
Page 16/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
Clean the LED ring contacts Return the handpiece and cord to the Acteon Customer Faulty cord contacts Service team to have them replaced User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C - Page 17/27...
Page 20
Possible causes Solutions Return to the Acteon Customer Service team to replace Faulty front face connector contacts the unit Page 18/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
Ultrasonic vibrations of the tip fitted to the end of the dental surgery ultrasonic handpiece. Vibration frequency ≥ 28 kHz. Tip amplitude ≤ 200 µm. User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C - Page 19/27...
Page 22
Page 20/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
Sterilise prior to each use Biohazard Sterilisation at 134°C in an autoclave Sterilisation at 132°C in an autoclave Washer-disinfector for thermal disinfection Ultrasonic bath User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C - Page 21/27...
Use a lint-free cloth for cleaning Use an ultrasonic tank for cleaning. Use a swab for cleaning Use deionised or osmosis-purified water for cleaning Page 22/27 - User Manual | Cube LED | J28821 | V3 | (17) | 03/2018 | NO40EN030C...
When your medical device has reached the end of its service life, contact your nearest dental equipment dealer, or the Acteon head office or one of the company branches to find out how to proceed. The relevant contact details are given in the chapter Branch addresses page 24.
Need help?
Do you have a question about the Cube LED and is the answer not in the manual?
Questions and answers