Maintenance Information and Precautions
Removing Dust from inside the Viewfinder
— CCD-TR78/TR88 only
(1) Remove the screw with a screwdriver (not supplied). Then, while sliding the RELEASE knob,
turn the eyecup in the direction of the arrow and pull it out.
(2) Clean the surface with a commercially available blower.
1
To Reattach the Eyecup
(1) Align the groove on th eyecup with the • mark on the barrel.
(2) Turn the eyecup in the direction of the arrow. Then, replace the screw.
1
Caution
Do not remove any other screws. You may remove only the screw to remove the eyecup.
40
2
2
CCD-TR78/TR88/TR98 3-810-917-13.E
Need help?
Do you have a question about the CCD-TR78 Operation Manual (primary manual) and is the answer not in the manual?
Questions and answers