Editing Onto Another Tape - Sony CCD-TR78 Operation Manual (primary manual) Operation Manual

Editing onto Another Tape

You can create your own video program by editing with any other h 8 mm, H Hi8, j VHS,
k S-VHS, VHSC, K S-VHSC, l Betamax or ¬ ED Betamax VCR that has video/
audio inputs.
After connecting the camcorder to the VCR,
(1) Slide the POWER switch to PLAYER.
(2) Insert a blank tape (or a tape you want to record over) into the recording VCR. Then insert your
recorded tape into the camcorder.
(3) Play back the recorded tape on the camcorder until you locate the point where you want to start
editing. Then press P to set the camcorder to playback pause mode.
(4) Set the recording VCR to recording pause mode.
(5) Press P on the camcorder and then on the VCR to start editing.
: Signal flow
To Edit More Scenes
Repeat steps 3 to 5.
To Stop Editing
Press p STOP on the camcorder and VCR.
30
CCD-TR78/TR88/TR98 3-810-917-13.E