Erasing An Index Signal - Sony Handycam CCD-TR3400 Operating Instructions Manual

Locating the marking position

Erasing an index signal

(1) Locate the index signal to be erased using the index scan or index search
function.
(2) Press INDEX ERASE on the Remote Commander within 2 to 10 seconds while
the desired program plays back. After the index signal is erased, the camcorder
returns to index scan or index search mode, whichever was used in step 1.
SEARCH
1
DATE INDEX
INDEX
2
MARK ERASE
Notes on erasing
• Press INDEX ERASE more than 2 seconds after the playback of the desired program
begins.
• You cannot erase the index signal on a tape with the red mark on the cassette
exposed.
• While the index signal is being erased, the sound cannot be heard and a black band
appears at the bottom of the picture. This will not affect the recorded sound or
picture.
• The camcorder can detect index signals marked with VCRs, but cannot erase them.
VCRs with an index function can detect index signals marked with this camcorder
but cannot erase them.
• An index signal may be erased when making PCM after recording on another VCR in
the portion where the index signal is marked.
Note on and Data Code
When an index signal is erased, Data Code on the same portion of the tape is also
erased.
REW 3 # FF
0 )
CCD-TR3400 3-859-084-22 (1)
65