Toner End Detection - Ricoh M156 Service Training

 About 50 pages can be printed between the toner near end
alert and the final toner end alert.
 Type B models: Normally this system is enabled, but the
operator can switch Toner End Option off with the User
Tools.
 Enabled: User tool is set to 'Stop Printing'
 Disabled: User tool is set to 'Continue Printing'
 When toner end detection is switched off, there will be no
warning message when the AIO is about to run out of
toner. The operator refills or replaces the AIO when printed
sheets become faint or blurred.
 Customers who use fax have to be careful about this, or
they might not be able to read incoming fax messages.
Slide 52
 Note that the type B machine monitors for toner end even if 'Continue Printing' is
selected. This means that the user can switch between 'Stop Printing' and
'Continue Printing' at any time, and if toner end occurs when 'Stop Printing' is
selected, then the toner end alert will occur.

Toner End Detection

52
Rm-MF1/Rm-P1 Training