Toner Overflow Prevention - Ricoh M156 Service Training

 Main Motor Rotation Count
 Time to replace the AIO cartridge can also be determined
 When toner end is detected in this manner, 'Replace Print
 Toner Overflow Prevention
 With the main motor rotation count feature, the machine
 If the print count exceeds this value, then 'Replace Print
 This feature is a safety measure to prevent the used toner
Slide 50
No additional notes

Toner Overflow Prevention - 1/2

by the length of time the main motor has been rotating.
Cartridge' is displayed alternately with 'Ready'.
can be set to stop printing after the print total exceeds a
certain set value.
Cartridge' remains on the display. Then a new AIO
cartridge must be installed.
tank from becoming full (there is no toner overflow detection
mechanism).
50
Rm-MF1/Rm-P1 Training