Appliance Layout; Wiring Diagram; Regulations; Transport - Bosch Tronic 4000 T Series Installation And Operating Instructions Manual

2.8

Appliance layout

1
2
8
4
Fig. 4 Design of the storage take
(Tronic 6000 T as an example)
[1] Storage cylinder
[2] CFC-free PU insulation
[3] Heating insert
[4] DHW outlet ½ "
[5] Cold water inlet ½ "
[6] Magnesium anode
[7] Temperature control
[8] Isolation fitting
2.9

Wiring diagram

T2
A1/L
A2/L
B1/N B2/N
Fig. 5 Connection diagram Tronic 4000 T
T2
A1/L
A2/L
B1/N
B2/N
Fig. 6 Connection diagram Tronic 6000 T
Tronic 4000 T | Tronic 6000 T
3
6
5
7
6720818520-07.2V
R1
6720818585-01.1V
R1 R2
6720818585-02.1V
3

Regulations

The applicable local standards regarding the installation and
handling of electrical DHW cylinders must be observed.
4

Transport

▶ Do not let the DHW cylinder fall.
▶ Transport the storage tank in the original packaging, and
use suitable means of transportation.
4.1

Transportation, storage and recycling

• The product must be stored in a dry, frost-free location.
• If applicable, observe Directive EU 2012/19/EC for
disposal of electrical and electronic old appliances.
5

Installation

Installation, electrical connection and
commissioning may only be carried out by a
contractor approved for such work by the gas or
energy supplier.
5.1

Important information

CAUTION:
▶ Do not let the DHW cylinder fall.
▶ Only remove the DHW tank from the
packaging at the installation location.
▶ If applicable, the installation of the DHW
cylinder and/or the electrical accessories
must satisfy IEC 60364-7-701.
▶ Select a wall for mounting the cylinder that
has sufficient load bearing capacity to
support the full DHW cylinder. Page 5.
CAUTION: Damage to the heating inserts!
▶ First make the water connections, and then
fill the DHW cylinder.
▶ Then connect the DHW cylinder to the
power supply via a connection socket with a
ground.
Regulations | 7
6 720 818 731 (2016/07)