Self-Cleaning - Beko CEG5331X User Manual

5
Cleaning

5.3 Self-Cleaning

WARNING: Please wait for finishing the self cleaning process and then switch off the
machine.
When is flashing, it indicates that the appliance needs to undergo self-cleaning. The appliance
will remain in the best condition if this function is performed at least once a month or more regularly
depending on the hardness of water used. It is also suggested that to
1. Fully fill the water tank.
2. Adding one pack of cleaning agent included in the box to the water tank.
WARNING: Do not use vinegar or other cleaning agent to do self-cleaning of this
appliance. The cleaning agent might damage the appliance.
3. Plug in the appliance.
4. Place a sufficient large container under the coffee spout.
5. In standby condition, press and hold
will be heard with
6. Press strong espresso button to confirm undergoing the self-cleaning process. To resume back to
the standby condition, press .
7. Will be flashing indicates that the appliance is undergoing the self-cleaning process.
WARNING: Keep skin/body away from the hot water.
8. When all the water in the water tank is being dispensed out,
be flashing. Remove all the remaining solution in the water tank and fill the tank with normal tap
water until the max position. When water is filled into the water tank,
appliance will continue the self-cleaning process.
9. When the self-cleaning process is completed, the appliance will switch off automatically.
5.4 Empty System Function
The empty system function is recommended to be used before long period of non-use, frost protection and
before talking to repair agent.
1. In standby condition, press and hold the
2. will then be flashing.
3. Remove the water tank from the appliance.
is under process. You can press
condition.
Fully Automatic Coffee Machine / User Manual
and strong espresso button
and strong espresso button
and
before removing the water tank to resume back to the standby
will be flashing.
and strong espresso button
latte button together for 5 seconds.
will light up stably indicates that the empty system
for 5 seconds. A beep sound
will goes off. Then the
25 / EN
will