Beko CEG5331X User Manual page 15

4
Operation
4.5 Preparing Latte Macchiato
Assembling the automatic milk froth system
Place the connection rubber into the slot
inside the lid.
Insert the connection milk tube to the
rubber outside the lid. (Open the inlet co-
ver.)
You can pull the coffee dispensing spout cover out, then take down the milk frother and switch
the milk frother to your desired direction for connecting the milk container (See chapter "Daily
Cleaning of the appliance", section cleaning the automatic milk froth system for how to take
down the milk frother), there is a protective cover for the milk tube connector inlet, just take it
off when you need to insert the milk tube connector.
Fully Automatic Coffee Machine / User Manual
Insert the connection milk tube to the
rubber outside the lid.
Insert the milk tube connector to the dis-
pensing spout milk frother inlet.
Close the lid.
1
Fill the milk container with milk and clo-
se the lid.
2
15 / EN