Beko CEG5331X User Manual page 24

5
Cleaning
Assemble the milk frother back to original
Insert the milk frother to the slot of machine.
5.1.4 Cleaning the milk container and connection milk tube
It is important to do this step daily to make sure the function of automatic milk frother running
in good condition.
1. Empty the milk inside the milk container and wash it with fresh water, take out the connection rubber
and container milk tube to wash it with fresh water too, then assemble them to the lid again (make
sure the connection is fit and correct).
2. Clean the both end of milk connection milk tube with fresh water,
to make sure the hole on the milk tube connector is clean (see picture),
you can use needle or bristle of brush to clean the hole.
3. Fill the milk container with fresh water and connect to the machine with
container milk tube.
4. Using Frothing milk function by pressing twice of
water in milk container can clean the connection tube internal. You can
stop the cleaning by press the
24 / EN
clean button, the
clean button again.
Fully Automatic Coffee Machine / User Manual