Beko CEG5331X User Manual page 23

5
Cleaning
5.1.3 Cleaning the automatic milk froth system
It is important to do this step daily to make sure the function of automatic milk frother running
in good condition.
1. Place a cup under the spout.
2. Fill the milk container with fresh water.
3. Connect the milk container to the coffee machine as describe in "Preparing Latte Macchiato" section
4. Press clean button twice.
5. The machine dispenses hot water and steam to wash the dispensing tube and milk spout.
6. Touch the button again to stop the water.
7. Take apart the milk frother by following procedure. Clean them with fresh water. Then insert the milk
frother into slot. (see below step)
Take out the spout cover and then take out the milk frother.
Take apart the milk frother into two parts and clean with fresh water
Fully Automatic Coffee Machine / User Manual
23 / EN