Daikin ATC50QRV16 Service Manual page 15

Si041257EC
Step
3 Unfasten the hook and
remove the bottom
frame ASSY.
4 Release the fan rotor
from the left groove.
5 Remove the fan motor.
Removal Procedure
Procedure
Bottom frame ASSY
Fan Motor / Fan Rotor
When reassembling the fan
motor and the fan rotor,
provide as much as 5 mm
(0.2 inch) of play between
the side face of the rotor and
the bottom frame.
Hook
(R20350)
Side face of rotor
5 mm (0.2 inch)
(R19333)
(1) Insert the fan motor allowing
for approx. 5 mm (0.2 inch)
of play.
(2) Tighten the fan rotor screw
until it stops. Then give the
screw one more turn.
(3) If the fan rotor rotates
appropriately, tighten the
screw completely.
(4) If not, repeat the procedure
Fan motor
from (1).
(R19334)
(R20351)
Points
Side face of
bottom frame
(R18879)
(R9582)
13