Daikin ATC50QRV16 Service Manual page 9

Si041257EC
Step
5 Remove the screw and
release the earth/
ground wire.
6 Pull out the indoor heat
exchanger thermistor.
7 Disconnect the 3
connectors.
8 Remove the screw of
the electrical box.
9 Lift up the electrical box
from the bottom frame
and remove the
electrical box.
Removal Procedure
Procedure
Indoor heat
exchanger
thermistor
Earth/ground wire
The position of the indoor
heat exchanger thermistor
varies depending on the
model.
Be careful not to lose the clip
of the thermistor.
(R19786)
(a) fan motor:
[CN_FAN] or [S1]
(b) swing motor:
(a)
[CN_STP] or [S6]
(c) fan motor (Hall IC):
(b)
[CN101] or [S7]
(c)
(R19787)
Electrical box
(R19788)
(R19789)
Electrical Box
Points
Clip
(R11268)
7