Table of Contents
Advertisement
ADJUSTING THE SNOW CHUTE GEARS
MOD. KCG-2421GE
ADJUSTING THE SNOW CHUTE GEARS ON 24" GASOLINE SNOW BLOWER
MODEL KCG-2421GE
If you find the snow chute crank handle is difficult to turn to adjust the
position of the snow chute, an adjustment to the gear tolerance can be
made as follows:
The swivel gear system tolerance is controlled by the nylon hex. nut (A)
Fig.1 found underneath the swivel gear assembly.
Loosen the nylon hex. nut (A) Fig.1 to make it easier to turn the snow chute
and crank handle.
Verify your adjustment by turning the crank handle, continue to adjust
nylon hex. nut if needed until the desired tolerance is obtained and the
snow chute turns easily.
FIGURE 1
Hide quick links:
Advertisement
Table of Contents
