Please keep your dated proof of purchase for warranty and servicing purposes. REPLACEMENT PARTS Replacement parts for this product are available at our authorized King Canada service centers across Canada. Please use the 10 digit part numbers listed in this manual for all part orders where applicable.
GENERAL SAFETY INSTRUCTIONS 1. KNOW YOUR TOOL 12. ALWAYS WEAR SAFETY GLASSES. Read and understand the owners manual and labels affixed to Always wear safety glasses (ANSI Z87.1). Everyday eye- glasses only have impact resistant lenses, thet are NOT the tool. Learn its application and limitations as well as its specific potential hazards.
Page 4
SPECIFIC SAFETY INSTRUCTIONS FOR THIS LOG SPLITTER 1) It is obligatory to read the instruction manual in full before using the 16) Check that the logs to be split are free from nails or wire. The log splitter. ends of the logs must be cut square and branches must be cut off flush with the trunk.
Page 5
ELECTRICAL INFORMATION & SPECIFICATIONS WARNING! ALL ELECTRICAL CONNECTIONS MUST BE DONE BY A QUALIFIED ELECTRICIAN. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY! ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE LOG SPLITTER DISCONNECTED FROM THE POWER SOURCE. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY! KC-10LS POWER SUPPLY (120V-1 PHASE) EXTENSION CORDS WARNING: THIS LOG SPLITTER MUST BE CONNECTED TO A...
Page 6
GETTING TO KNOW YOUR LOG SPLITTER & OPERATING GUIDELINES Getting to Know your Log Splitter Before attempting to use the log splitter, it is recommended to familiarize yourself with all the controls, operating features and safety requirements of your log splitter. 1.
Page 7
ASSEMBLY Warning! For your own safety, do not connect the log splitter to the power source until the machine is completely assembled and you have read and understood the entire instruction manual. Warning! Never use the log splitter if it is not in perfect order or if it needs servicing.
OPERATION OPERATION Safe Operating Zone Warning! When operating this log splitter, it is highly important to make sure you are standing in the safe operating zone when ever the ram is in motion. The safe operating zone is located next to the log splitter as shown in Fig.7. Splitting logs guideline Warning! Never attempt to split a log which is longer than 21”.
MAINTENANCE Maintenance Intervals The following maintenance interval should be followed to ensure best performance and long life of your log splitter. Before each use: 1) Check condition of log splitter. 2) Perform bed maintenance/cleaning. 3) Check drive belt tension and/or condition. 4) Check condition of power cord.
Page 10
MAINTENANCE Replacing/Tensioning the Drive Belt 1) Disassemble the two protective side guards (A) Fig.11 by removing the 6 self tapping screws (B) and 2 hex. bolts (C) on each side. 2) Remove the engagement lever (D) Fig.11 and the safety lever knob (E), now remove the top cover (F) to completely expose the internal parts of the log splitter.