Table of Contents
Advertisement
Press
or
to select the optimum recording volume level for the sound source.
6
You can check the current recording volume level on the peak level meters. Adjust the recording volume so that the
recording volume level stays around -12 dB, which fits within the optimum range (
If too loud sounds are detected during recording, [OVER] (
indicator (
) lights. In such a case, turn down the recording volume by pressing
the peak indicator goes out to avoid sound distortion.
If you can check the recording volume in advance, it will be easier to use the Rehearsal function for adjusting the
recording volume level.
Press
REC/PAUSE.
7
appears on the display window to indicate that recording has started, and the recording indicator (
red.
To stop recording, press
8
[Saving...] and then the recording standby screen appear.
Now you can press
Note
During manual recording, the VOR function does not work.
Hint
STOP.
to play the file you have just recorded.
) appears on the display window and the peak
45
).
until [OVER] disappears and
) lights in
Hide quick links:
Advertisement
Table of Contents
