Sony PCM-A10 Help Manual page 34

Help Guide
Linear PCM Recorder
PCM-A10
Charging the battery with a computer
You can use a computer to charge the battery of your linear PCM recorder.
If you use the linear PCM recorder for the first time or you have not used it for an extended period of time, charge the
battery until the indicator appears on the display window.
It takes about 3 hours (*) to fully charge the exhausted battery.
*
Approximate time period that requires to charge the exhausted battery at room temperature. It may vary depending on the remaining battery
power or the state of the battery.
Slide the USB slide lever in the direction of the arrow.
1
Insert the USB connector into the USB port of a running computer.
2
While the battery is charging, the battery indicator animation (
When the battery is fully charged, the battery indicator will indicate
) appears on the display window.
( ).
34