Sony PCM-A10 Help Manual page 102

Help Guide
Linear PCM Recorder
PCM-A10
Establishing a Bluetooth connection with a registered (paired) Bluetooth audio device
When your linear PCM recorder and a Bluetooth audio device are already registered (paired) with each other, you can
simply establish a Bluetooth connection between the devices.
Turn on the Bluetooth function on the Bluetooth audio device as needed.
1
On the linear PCM recorder, select [
2
The list of the registered (paired) Bluetooth audio devices appears on the display window.
Select the Bluetooth audio device that you want to connect with the linear PCM recorder.
3
A Bluetooth connection is established and [Connection Complete] appears on the display window.
Start playback on the linear PCM recorder.
4
Now, you can listen to audio from the Bluetooth audio device.
To unregister a device
Select [ Bluetooth] - [Audio Device] - [Manage Added Devices] from the HOME menu, select the desired Bluetooth
audio device, and then select [Delete Device] on the OPTION menu.
Follow the on-screen instructions to delete the device registration (pairing) information of the selected Bluetooth audio
device.
To switch the audio output destination between the Bluetooth headphones and the headphones
connected to the linear PCM recorder
While a Bluetooth connection is established, no audio is output to the headphones connected to the
jack on the linear PCM recorder.
To use the connected headphones for listening, disconnect the Bluetooth connection.
Note
The device registration (pairing) information is cleared in the following cases. You need to register (pair) the device with your
linear PCM recorder once again.
The settings on either or both devices are reset to the default settings, for example, due to initialization.
The device registration (pairing) information is deleted, for example, during the course of a repair service.
If the device registration (pairing) is deleted from the linear PCM but the Bluetooth audio device still has the device registration
(pairing) information of the linear PCM recorder, delete the information and make device registration (pairing) once again.
While the Bluetooth function is turned on, the battery wears quickly to a large extent.
Depending on the Bluetooth audio device connected with your linear PCM recorder, the communication environment, or the
ambient conditions, you may hear noises or audio dropouts.
If the Auto Power Off function is active on your linear PCM recorder, the linear PCM recorder will turn off in the specified time
period even while it is connected with a device via a Bluetooth connection. To avoid this, change the time period for the Auto
Power Off function to suit your needs.
Bluetooth] - [Audio Device] - [Connect] from the HOME menu.
102
(headphones)