Indoor Unit - Panasonic CS-A18DKD Service Manual

CS-A18DKD CU-A18DKD / CS-A24DKD CU-A24DKD
2.2.

Indoor Unit

AUTO
OFF / ON
Automatic Operation Button
• Press for < 5 second to operate Automatic
operation mode.Use when the remote
control cannot be used.
• Press for > 5 second to operate Cooling
operation mode and compressor force
to on ("beep" sound will be heard). Used
when test running or servicing.
• Within 20 second of Cooling operation,
press continuously for > 5 second to enter
various setting mode. "beep, beep" sound
will be heard. (Used to toggle remote
control signal receiving sound or select
remote control transmission code.)
Operation Indication Lamps (LED)
• POWER (Green) ........ Lights up in operation,
blinks in Automatic
Operation judging.
• TIMER (Orange) ....... Lights up in Timer
Setting.
• QUIET (Orange) ........ Lights up in Quiet
Operation.
• POWERFUL (Orange) .. Lights up in Powerful
Operation.
(Green) ........... Lights up in Ionizer
•
ION
Operation.
•
SUPER
(Blue) ... Lights up in operation.
ALLERU-BUSTER
Operation Mode
• Heating, Cooling, Soft Dry and Automatic
Operation.
Powerful Operation
• Reaches the desired room temperature
quickly.
Timer Operation
• Delay OFF/ON Timer control.
Quiet Operation
• To provide quiet operation.
Ionizer Operation
• Generate and discharge negative ion.
Random Auto Restart Control
• Unit will be restarted, when resume from
power failure, at previous setting.
Anti-Freezing Control
• To prevent indoor heat exchanger from
freezing.
Indoor Fan Speed Control
• Manual control fan speed
(High, Medium and Low).
• Automatic fan speed
Airflow Direction Control
• Vertical airflow control can be adjusted
automatically or manually by remote control.
•
Horizontal airflow control can be adjusted
automatically or manually by remote control.
Time Delay Safety Control
• Restarting is inhibited for approximately
3 minutes.
7 Minutes Time Save Control
• To reduce the built up humidity inside
the room.
Anti-Dew Formation Control
• Anti-Dew Formation Control for indoor
unit discharge area.
Hot-Start Control
• To prevent cold air being discharge during
Heating operation starts.
Anti Cold Draft Control
• To prevent the cold draft during Heating
mode operation in thermo off condition.
4