Hitachi Compute Rack 220H Replacement Manual page 71

Table 4-3: PCI slot specification
PCI
slot
1 PCI Express 3.0
2
3
4
5 2
Notes:
1 A PCI card within has a base class value "01h" is given priority to performing shadow.
2 This slot can be used only when two processors are installed.
3 When you install a full-size card, you need to remove the retainer of the PCI card.
Removing a PCI card
1. Turn off power to the system and peripherals.
See Powering off system unit
2. Slide out the system from the rack cabinet.
See Sliding out the system unit from a rack cabinet
3. Remove the front top cover of the system.
See Removing the front top cover
4. Remove the rear top cover of the system.
See Removing the rear top cover
PCI type I/O
voltage
3.3 V
Replacing parts
Hitachi Compute Rack 220H CRU Replacement Guide
Slot Bus Device
form number number
8 lanes 2 0
(x8)
3 0
4 lanes 4 0
(x4)
5 0
8 lanes
81 0
(x8)
on page 3-4.
on page 3-7.
on page 3-8.
Bus scan Support PCI
order card type
1
1 PCI Express
x1, x2, x4, x8 /
standard /half
3
size
2 PCI Express
x1, x2, x4, x8 /
standard / full
3
size
3 PCI Express
x1, x2, x4 /
4
lowprofile /
MD2
PCI Express
5
x1, x2, x4, x8 /
standard / full
3
size
on page 3-5.
4-19