Hitachi Compute Rack 220H Replacement Manual page 45

Non hot-swappable component: Fan / DIMM / PCI card
Fan / DIMM
Power off
Pull out the system unit
Remove the cover
Replacing component
Remove failed part
Install spare part
After Replacing
Install the cover
Push back the system unit
Power on
Check the ERROR LED turned off
Figure 3-2: Basic procedure – non hot-swappable component
Start Replacement
Identifying a Failed Component
Check indicator LEDs and
Identify a failed component
Consult to Hitachi Data
System Technical Support
And order a spare part
Preparation
Hitachi Compute Rack 220H CRU Replacement Guide
Pull out the system unit
Remove the cover
Replacing component
Remove failed part
Install spare part
After Replacing
Install the cover
Push back the system unit
Check the communication is back
End
PCI card
Power off
Power on
3-3