Hitachi Compute Rack 220H Replacement Manual page 67

10. Grasp and slide the air baffle toward the rear side of the system slightly.
11. Lift up and remove the air baffle.
Figure 4-15: Remove the air baffle
12. Check which memory slot you need to remove the DIMM from.
13. Open the lock tabs, and then remove the DIMM from the memory slot.
Be careful not to tamper with the nearby parts when you remove
•
NOTICE
the DIMM, since the working space is narrow.
Make sure you do not bend the electrolytic capacitors when
•
opening the lock tabs of a memory slot. Otherwise, the
motherboard may be damaged.
Figure 4-16: Remove a DIMM
Hitachi Compute Rack 220H CRU Replacement Guide
Lock tab
Replacing parts
Lock tab
4-15