GDD Instrumentation MPP-EM2S+ Instruction Manual page 37

The sample can be one of two types: Wall or Cylinder.
If you are scanning a core, select the Cylinder option.
For a rock of flat surface, select the Wall.
Both types need the starting Depth to be specified.
Enter the core Diameter in millimeters.
The Depth unit (Meter or Foot) depends of the project configuration made previously.
The Diameter is always in millimeters.
Select the Half check box if you have a split core.
When you are scanning a split core sample, always put the MPP probe on the flat side.
All project configurations are automatically saved when you exit from the software.
To delete or edit projects go to Function menu-> Project Manager.
Instrumentation GDD Inc.
Tap with your
finger on the
project you
want to edit.
Hold your
finger until the
Edit Window
appears.
Delete
selected
projects
2018-11-09 36