Table of Contents
Advertisement
9. Reading Modes
It is possible to take readings by using three different methods with the MPP-EM2S+. These methods
are Punctual, Continuous and Single Reading modes.
9.1
Punctual mode
In this mode, each time you click MEM button in the GDD MPP software or you press MEM button on
the probe, one reading is stored in the current project. This reading is associated to the selected Core
and taken at the current Depth position. If the current Spacing is not 0, the current Depth is
incremented by the value of Spacing and the next reading will be stored at this Depth position.
9.2
Continuous mode
In this mode, the readings are recorded automatically according to the recording time interval you need
(0.1 s, 0.2 s, 0.5 s, 1.0 s, 2.0 s, 5.0 s). By clicking MEM button in the GDD MPP software or pressing MEM
button on the probe you START or STOP recording readings. To mark the positions, you click STAMP
button in the GDD MPP software or press STAMP button on the probe. The readings are associated to
the selected Core and equally distributed between Depth positions marked by STAMP. Each time you
make a STAMP, the Depth is incremented by the value of Spacing if it is not 0.
Instrumentation GDD Inc.
2018-11-09
31
Advertisement
Table of Contents
