Table of Contents
Advertisement
6. Probe buttons and switches
6.1 On / Off Switch
Turn on the probe with the On / Off toggle switch.
6.2 Cable / Wireless / Prog Switch
The Cable / Wireless / Prog. switch is used to select the operating mode.
*** It is important to place the switch in the position wanted before turning the probe on.
The Cable and Wireless positions are used to operate with or without cable. The Prog position is not
used for normal operation. If the operating mode must be changed during the operation, the probe
must be turned off before changing it.
Instrumentation GDD Inc.
2018-11-09
10
Advertisement
Table of Contents
