Table of Contents
Advertisement
6.3 STAMP and MEM buttons
There are two buttons on the handle of the MPP–EMS2+ probe. These buttons have the same utility as
the Stamp and Mem buttons in the GDD MPP Android software and were designed to facilitate
handling. Pressing the both buttons together initializes the probe, so it makes the same action as
Initialize button in the GDD MPP Android software (for the firmware versions starting from MPPi5_6).
See Section 9 – Reading Modes for more details.
6.4 BI button
See Section 5.3 – Battery level indicator to know how to use this button.
Instrumentation GDD Inc.
2018-11-09
11
Advertisement
Table of Contents
