Panasonic EW1611 Operating Instructions Manual page 5

WARNING
Do not use in a way exceeding the rating of the
household outlet or the wiring.
- Exceeding the rating by connecting too many power
plugs to one household outlet may cause fire due to
overheating.
Always ensure the appliance is operated on an
electric power source matched to the rated voltage
indicated on the appliance.
Fully insert the power plug.
- Failure to do so may cause fire, electric shock, or
injury.
The supply cord cannot be replaced. If the cord is
damaged, the appliance should be scrapped.
- Failure to do so may cause an accident or injury.
In case of an abnormality or malfunction
Immediately stop using and remove the power plug
if there is an abnormality or malfunction.
- Failure to do so may cause fire, electric shock, or injury.
<Abnormality or malfunction cases>
• The main unit or cord is deformed or abnormally
hot.
• The main unit or cord smells of burning.
• There is an abnormal sound during use of the
main unit or cord.
Immediately request inspection or repair at an
→
authorized service center.
PB014381 - EW1611W451 (01EN)_03-01-17.indd 5
This product
Do not drop or subject to shock.
- Doing so may cause injury.
Do not modify, disassemble or repair.
- Doing so may cause injury due to fire or malfunction.
Contact an authorized service center for repair.
→
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the appliance.
- Failure to do so may cause an accident or injury.
Cleaning
Always unplug the power plug from a household
outlet when cleaning the power plug.
- Failure to do so may cause electric shock or injury.
Regularly clean the power plug to prevent dust
from accumulating (once every half a year).
- Failure to do so may cause fire due to insulation
failure caused by humidity.
Disconnect the power plug and wipe with a dry cloth.
5
2017/3/1 8:59:43