Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Bowers & Wilkins 96002
- Page 1 B&W International...
-
Page 2: Table Of Contents
B&W Contents Thank-you for choosing a B&W bike case Thank-you for choosing a B&W bike case ........1 Congratulations on your Airline Travel with your bike. -
Page 3: Airline Travel With Your Bike
25.4 mm = 1” (Item no. 96002) (Item no. 96910) (Item no. 96200) (Item no. 96006/N) thoroughly familiar with the brakes and the gears and know the condition they are in. - Page 4 B&W B&W The following prices and conditions apply for different airlines (Status December 2011, all details provided without liability 1€ = aprox. $1.30): Airline One-way flight One-way flight Comments Registration Airline One-way flight One-way flight Comments Registration Short & medium Long haul Short &...
-
Page 5: Bike Case
B&W 1. bike case bike case B&W Insert the right adapter into the mounting Scope of delivery element for your bike’s axle system. 1. ASF frame ˆ 2. Rear mount The mounting elements for the most 3. Front mount widespread quick-release systems are 4. - Page 6 B&W bike case bike case B&W Open the release lever on the brakes Open the quick-release or full-floating (Shimano, SRAM) on racing bikes or slide axles on MTBs. If the front wheel can’t be the pin in the gear brake handle on the pulled out, it is due to the drop locks.
- Page 7 B&W bike case bike case B&W Slide the quick-releases into the ASF Then fix the frame onto the ASF; use the mounting elements. Guide the springs so quick-releases or full-floating axles on that the thin areas of all springs are point- your bike.
- Page 8 B&W bike case bike case B&W Place the assembled bike in front of the Open the seat post clip on the clamp or upright bike case and make sure that no on the frame by one or two turns. Pull the components protrude beyond the dimen- seat post out.
- Page 9 B&W bike case bike case B&W Push the plastic hub protectors onto the Wrap the • axle ends. These are relatively reliable in tool used (pedal and Allen wrench) • preventing the axles pushing through torque key with bits (for proper assembly) •...
-
Page 10: Assembly On Arrival
B&W bike case bike case B&W Close the locks by pressing the keys. Insert your business card or a note with your address in the little address pocket. Lock the bike case. Please generally check before travelling by air with your bike in the bike case whether damage to the frame or other components can occur due to vibrations or gravita- tional forces during transport. -
Page 11: Bike Box
2. bike box B&W bike box B&W Scope of delivery Clean the seat post and protect it with insulation tubing. Carefully put these two to one side still assembled. • Bike box, including 2 keys • 2 B&W wheel bags •... - Page 12 B&W bike box bike box B&W Open the release lever on the brakes Open the quick-release or axles on full- (Shimano, SRAM) on racing bikes or slide floating axles on MTBs. the pin in the gear brake handle on the handlebars (Campagnolo).
- Page 13 B&W bike box bike box B&W Alternative: Turn the rear derailleur back slightly and continue to hold it in place with one hand so it doesn’t fall uncontrolled due to the If your stem cannot be opened at the spring tension when you release the front, loosen and remove the above screws.
- Page 14 B&W bike box bike box B&W Wrap the whole chain belt in air cushion Remove the quick-releases from the hub film so that the chain, which is always a and pack them in the supplied wheel little oily, is isolated from the rest of the bags.
-
Page 15: Assembly On Arrival
B&W bike box 3. bike bag B&W Scope of Place the packed wheels in the B&W bike case, the sprocket pointing inwards in the delivery frame triangle section where it cannot cause any damage. Close the case while 1. ASF frame it is lying on the ground and make sure 2. -
Page 16: Anti Shock Frame (Asf) Assembly
B&W bike bag bike bag B&W Anti Shock Frame (ASF) assembly Packing the bike Open the bike bag. Switch to the large chain wheel at the back front front and the smallest pinion on the back. Take the accessories out and place them on the This provides some protection against the floor so that you have them readily available as sharp edges of the chain wheel. - Page 17 B&W bike bag bike bag B&W Open the release lever on the brakes Open the quick-releases or full-floating (Shimano, SRAM) on racing bikes or slide axles on MTBs. the pin in the gear brake handle on the If the front wheel can’t be pulled out, it is handlebars (Campagnolo).
- Page 18 B&W bike bag bike bag B&W Slide the quick-releases into the ASF Then fix the frame onto the ASF; use the mounting elements. Guide the springs so quick-releases or full-floating axles on that the thin areas of all springs are point- your bike.
- Page 19 B&W bike bag bike bag B&W Protect the whole frame either with insu- Push the plastic hub protectors onto the lation tubing or with air cushion film. axle ends. These are relatively reliable in preventing the axles pushing through the packaging or causing damages to the frame.
- Page 20 B&W bike bag bike bag B&W Initially release the front screws on the Open the seat post clip on the clamp or handlebar stem by one or two rotations on the frame by one or two turns. Pull the and turn the handlebars down until the seat post out.
-
Page 21: Assembly On Arrival
B&W bike bag B&W 4. foldon case Insert the bottles into the holder on the Scope of delivery frame so you do not forget them. • foldon case Close the bike bag. Secure both straps • with a little padlock if necessary or with a Two keys key ring (possibly with both) so that the zip cannot be open without you wanting. -
Page 22: Defects Liability And Guarantee
B&W B&W Defects liability and guarantee You are using a product from the company B&W. All of our products are subject to strict quality controls. The quality controls cover the purchasing of raw materials and production and continue until the products leave our warehouse. If you have a complaint when using our products, we are pleased to remain at your disposal Defects in the sense of the warranty apply if: •... -
Page 23: Special Cases & Bags Junkendiek
B&W B&W International GmbH Fon: 0049 (0) 54 51 / 89 46 - 0 special cases & bags Fax: 0049 (0) 54 51 / 89 46 - 444 Junkendiek 5 info@b-w-international.com D-49479 Ibbenbüren www. b-w-international.com...