Bowers & Wilkins 96002 Manual page 9

B&W bike case
14
1.1
Push the plastic hub protectors onto the
axle ends. These are relatively reliable in
preventing the axles pushing through
the packaging or causing damages to the
frame.
1.2
Place a cotton cloth over the sprocket and
slide the ends of the cloth towards the
spokes on the back. This prevents the
packaging becoming dirty and the cloths
are useful for taking care of the bike later.
1.3
Put the wheels into the wheel bags.
1.4
Wrap the pedals in cotton cloth and store
them in the little pockets on the wheel
bags.
If there is any space left in the bike case,
i
you can slide a well packed helmet and
even packed cycling shoes into the cavity.
1.5
Wrap the
•
tool used (pedal and Allen wrench)
•
torque key with bits (for proper assembly)
•
carbon lubricant if necessary
•
chain and penetrating oil for care (no
spray cans!)
•
air pump
•
saddle bags
individually in cotton cloths.
1.6
Store all of this together with this manual
and your general bike instruction manual
in a little box at the bottom of the bike
case.
Insert the bottles into the holder on the
i
frame so you do not forget them.
1.7
Place the wheel bags on the bike in the
bike case. The sprocket on the back wheel
should point inwards and the width
should be as small as possible.
1.8
Close the lid slowly and carefully. If the lid
on the bag cannot be closed easily, check
whether the wheel bags are not posi-
tioned well, whether the handlebars are
too wide or whether the seat is protruding
too high. Dismantle as described above if
necessary. Align the wheel bags better if
necessary.
Close the lid slowly and carefully again.
Make sure that all lock bolts cleanly slide
into the counterparts.
bike case B&W
15