3.5 Rain sensor
Install the rain sensor by clamping it to the pole with two hose clamps;
For Meteobot Pro: the top of the sensor should be 5 cm above the top of the pole;
For Meteobot Mini: the top of the sensor should be 20 cm above the top of the pole;
The sensor should be facing East;
IMPORTANT: The upper opening of the sensor should be absolutely horizontal.
3.6 Wind speed sensor
Install the sensor at the top of the pole with a single hose clamp;
IMPORTANT: The sensor should be above all other sensors;
The sensor should be facing West.
Page 9 / 22