Motorola solutions PMLN6621 User Manual page 11

MN000217A01.book Page 9 Thursday, October 29, 2015 12:41 PM
Attach to wall in four
locations (fasteners
not provided)
Figure 4: Mounting Multi-Unit Charger to Wall Bracket
1. Mount bracket to wall using appropriate fasteners in 4 locations
(fasteners not included in kit).
2. Install two M4x25 screws (included in kit) through bracket into charger
base as shown. Do not over tighten the screws.
SERVICE
The Multi-Unit Charger is not user repairable. Replacements should be ordered
from your local dealer.
Tel: 1-800-422-4210 (US & Canada)
Tel: 1-847-538-8023 (International)
M4x25 screw – two
locations (provided)
9