Mounting Hmp110 Probes; Mounting Hmp115 Probes - Vaisala RFL100 Quick Manual

Mounting HMP110 Probes

Robust stainless steel probe for humidity and temperature measurement in demanding
conditions. Suitable for measurement inside chambers, fridges, and freezers in temperature
range -40 ... +80 °C (-40 ... +176 °F). Must be connected using a cable - the probe is not
designed to be integrated with the RFL100 housing. Probe diameter 12 mm (0.47 in).
1
Figure 2 HMP110 Probe
1 M12x1 thread for mounting the probe in a through-wall installation using mounting nuts.
2 Attach from this area if using mounting clamps or zip ties.
3 Sensor protection filter. Do not attach from this area.

Mounting HMP115 Probes

Probe for general purpose humidity and temperature measurement. Designed to be integrated
with RFL100 housing for minimum footprint, but can be connected using a cable as well.
Operating temperature range -40 ... +60 °C (-40 °F ... +140 °F).
1
Figure 3 HMP115 Probe
1 Plastic sleeve that locks the probe in place when integrated with the RFL100 housing.
2 Attach from this area using mounting clamps or zip ties.
3 Sensor protection filter. Do not attach from this area.
8
2 3
2 3
M211822EN-D