Library Path - Sony TMS Training Manual

Confidential

8.1.2 Library Path

Please set the following Library Path Settings
Library Library
Name Type
Both
Library
1
Click 'Add' to add each library.
The local path of the library is path as seen from the TMS Server. If the storage was
directly attached to the server it would be seen as a drive letter.
Local Path Example:
The FTP settings are very important and are sent to the projector when using the FTP
protocol to send data. FTP is also used to interrogate the projectors content and show
on the TMS library.
FTP Path Example:
UN: Administrator
PW: FTP Administrator Password (same as Server Administrator password)
The Network Path of the library is the path as seen from the SMS server. This will be
as a network share as the example below.
Volume Size: Enter the volume size of the Library folder in GB, typically 11170GB.
Important
Network Path: Leave blank (so that FTP protocol is used)
Click Apply and restart the service.
October 15
Integrator Training, UK
Digital Cinema Deployment
Primary Local Path
KDM
Tick leave blank
D:\Library1
ftp://192.168.101.5/
FTP Network Path
Settings
leave blank
FTP
settings
IP, UN
and PW.
Domain Username
leave blank
leave
blank
35 of 49
Password
leave
blank