ECOVACS DEEBOT R98 Instruction Manual page 15

6 Start
Press the AUTO Mode Button on DEEBOT.
DEEBOT moves around to scan the environment
and build the map, and starts to work in AUTO
Cleaning Mode at the same time.
DEEBOT must be powered ON to clean.
*
To choose another Cleaning Mode, please
*
refer to section 3.3 Cleaning Mode Selection
for details.
Do not manually move the robot when it is
*
cleaning or charging.
7 Pause
Pause DEEBOT by pressing the AUTO Mode
Button on the robot.
* The AUTO Mode Button on the robot's
Control Panel stops glowing if the robot
pauses for more than 10 minutes. Press
the AUTO Mode Button on the robot or
press any button on the App screen to
wake up the robot.
Automatic Emptying
8
When DEEBOT finishes cleaning, or its
battery gets low, it returns to the Charging
Dock to recharge itself. Once DEEBOT docks
successfully, it automatically empties its own
Dust Bin into the Handheld Vacuum Cleaner.
* Automatic Emptying will last about 20
seconds. Do not remove the Handheld
Vacuum Cleaner from the Charging Dock
during this process to avoid dust leakage or
damage.
3. Operating and Programming
13
EN