Cross Technologies 4116-21T23 Instruction Manual
  1. Manuals
  2. Brands
  3. Cross Technologies Manuals
  4. Electronic dictionary
  5. 4116-21T23
  6. Instruction manual

Cross Technologies 4116-21T23 Instruction Manual

S-band to s-band weather resistant unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model 4116-21T23
Instruction Manual
Translator, S-Band to S-Band
Weather Resistant* Unit
September 2015, Rev. B
Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be
reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating
the equipment.
When ordering parts from Cross Technologies, Inc., be sure to include the equipment model number,
equipment serial number, and a description of the part.
C
T
ROSS
ECHNOLOGIES, INC.
6170 Shiloh Road
Alpharetta, Georgia 30005
(770) 886-8005 • FAX (770) 886-7964 • Toll Free 888-900-5588
WEB www.crosstechnologies.com
E-MAIL info@crosstechnologies.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4116-21T23 and is the answer not in the manual?

Questions and answers

Related Manuals for Cross Technologies 4116-21T23

Summary of Contents for Cross Technologies 4116-21T23

  • Page 1 Weather Resistant* Unit September 2015, Rev. B Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc. for purposes of operating the equipment.

  • Page 2: Table Of Contents

    All Cross Technologies, Inc. products are warranted against defective materials and workmanship for a period of one year after shipment to customer. Cross Technologies, Inc.’s obligation under this warranty is limited to repairing or, at Cross Technologies, Inc.’s option, replacing parts, subassemblies, or entire assemblies. Cross Technologies, Inc. shall not be liable for any special, indirect, or consequential damages.

  • Page 3: General

    1.1 Equipment Description The 4116-21T23 Translator converts 2.02 - 2.12 GHz to 2.20 - 2.30 GHz. Front panel LEDs provide indication of DC Power, and PLL Alarm. The RF in to RF out gain is adjustable from 0 to -60 dB (1 ±1 dB steps).

  • Page 4: Technical Characteristics

    -110 Controls, Indicators Gain and internal 10MHz frequency via Ethernet M&C or Status/Control Connector Gain, 10M Frequency PLL Alarm Red LED, External Contact Closure Power Green LED (Technical characteristics continued on page 5...) 4116-21T23 Manual, Rev. B Page 4 09/24/15...
  • Page 5 8” Wide X 6” High X 16” Deep, Weather Resistant* enclosure. Power 100-240 ±10% VAC, 47 - 63 Hz, 25 watts maximum. **+0 to +50 degrees C; Specifications subject to change without notice. 4116-21T23 Manual, Rev. B Page 5 09/24/15...

  • Page 6: Installation

    2.0 Installation The 4116-21T23 Translator consists of a 8” Wide X 6“ High X 16” Deep Weather Resistant* enclosure. A switching, ± 12, +24, +5 VDC power supply provides power for the internal assemblies. The 4116-21T23 can be secured to a mounting plate using the 4 holes on the bottom of the front and rear panel.

  • Page 7: M&C Commands

    2.3 M&C Commands The following tables summarize the commands and status queries applicable to the 4116-21T23 frequency converter. PLEASE NOTE: The two character {aa} prefix, shown in the table below, is present ONLY when RS485 is selected. Table 2.1 - Model 4116-21T23 M&C Commands Table 2.1: Model 4116-21T23 M&C Commands...

  • Page 8: M&C Queries

    2.4 M&C Queries Table 2.2 Model 4116-21T23 M&C Commands Table 2.2: Model 4116-21T23 M&C Queries Command Syntax Description Gain {aaSG} Returns {aaSGxxx} where: xxx = 3 characters Range: 0 to -600 ( in 1.0 dB steps) Example: {aaSG-240} indicates the...
  • Page 9 Table 2.3 Model 4116-21T23 M&C Commands (Continued from page 7) Table 2.3: Model 4116-21T23 M&C Queries - Continued... Command Syntax Description Int. 10 MHz reference offset {aaSO} Returns {aaSOxxxxx} where: xxxxx = 5 characters Range: +2000 to -2000 Summary Alarm...

  • Page 10: Ethernet Interface Installation

    Contact Cross Technologies for the SNMP MIB file. 2.5.1 Methods of Connection Directly Connected to a PC: For control from a local PC, attach the 4116-21T23’s Ethernet port to the Ethernet network connector on the PC using a crossover RJ-45 cable. LAN Connection For LAN connections, attach the 4116-21T23 Ethernet port to the LAN using a normal RJ-45 cable.
  • Page 11 In the left frame of the configuration manager click on Network to display the Network Settings screen. Enter the IP address, Subnet mask, and Gateway address with delimiter dots (example: 192.168.192.47). Click apply settings in the left frame to apply the new settings in the network device. 4116-21T23 Manual, Rev. B Page 11 09/24/15...

  • Page 12: Webpage M&C

    The next screen is a “Connect To” dialog box. Select TCP/IP (Winsock) from the “Connect” drop down menu. Enter the IP address of the 4116-21T23 in the “Host address:” field and 9999 in the “Port number” field. Figure 2-E shows an example of the Hyper Terminal settings required to access the SNMP configuration menu.
  • Page 13 SNMP traps are not implemented. The unit will not process SNMP SET and GET requests from an SNMP manager unless the IP address associated with that manager is entered in the device server. 4116-21T23 Manual, Rev. B Page 13 09/24/15...
  • Page 14 Figure 2-F: Device Server Configuration Menu 4116-21T23 Manual, Rev. B Page 14 09/24/15...
  • Page 15 2.02 - 2.12 GHz Insert External 10MHz) Output level = S-Band Input. Reference here (+2 to +8 dBm). +2 to +8 dBm ±1.0 dB. 1/4 - 20 Tapped Thru, 4 Places 12.00 15.5 15.875 7.50 4116-21T23 Manual, Rev. B Page 15 09/24/15...

  • Page 16: Physical Interface

    RS422/RS485 Data In+, RS232 Data In NOTE: Planning Ethernet Access It is recommended that IP knowledgeable customer personnel be consulted as a resource in the installation and use of the Ethernet access features of the Cross Technologies product. 4116-21T23 Manual, Rev. B Page 16...

  • Page 17: Installation/Operation

    2.8 Installation/Operation Installing and Operating the 4116-21T23 Translator 1. Connect a -30 dBm to 0 dBm signal to RF In, J1, (Drawing 2.6). 2. Connect the RF Output, J5, (Drawing 2.6) to the external equipment. 3. Using the pre-assembled AC power input cable (furnished), connect 100-240 ±10% VAC, 47- 63 Hz, 25 watts maximum, to AC IN connector on the front panel.

  • Page 18: Alpharetta, Georgia

    ROSS ECHNOLOGIES, INC. 6170 Shiloh Road Alpharetta, Georgia 30005 (770) 886-8005 FAX (770) 886-7964 Toll Free 888-900-5588 WEB www.crosstechnologies.com E-MAIL info@crosstechnologies.com Printed in USA 4116-21T23 Manual, Rev. B Page 18 09/24/15...

Table of Contents