Subscribe to Our Youtube Channel
Related Manuals for Columbus IWV 40/100
Summary of Contents for Columbus IWV 40/100
- Page 1 IWV 40/100 Operating manual Industrial vacuum cleaner Read these This machine is instructions carefully intended for before operating the industrial and machine! professional use only! 09.2018...
- Page 2 This manual should be considered an integral part of the vacuum cleaner and must be kept together with the unit until this is scrapped. In case of loss of or damage to the manual, ask columbus for a new copy.
-
Page 3: Table Of Contents
Industrial vacuum cleaner IWV 40/100 Contents 1 Information ............................4 1.1 Identification of the main parts ....................... 4 1.2 Accessories provided ........................5 1.3 Identification details of manufacturer ..................... 6 1.4 Type plate ............................6 1.5 Intended uses ..........................7 1.6 Allowed environmental conditions .................... -
Page 4: Information
Industrial vacuum cleaner IWV 40/100 1 Information 1.1 Identification of the main parts 1) Suction unit 2) Release fastener 3) Push handle 4) Suction pipe coupling point 5) Filtering chamber 6) Level indicator 7) Castors 8) Fixed wheels 9) Container release lever... -
Page 5: Accessories Provided
Industrial vacuum cleaner IWV 40/100 1.2 Accessories provided 21478300 – POLYESTER FILTER Ø500 H100 21495000 – OIL SIEVE GRID... -
Page 6: Identification Details Of Manufacturer
Industrial vacuum cleaner IWV 40/100 1.3 Identification details of manufacturer G. Staehle GmbH u. Co. KG columbus Reinigungsmaschinen Mercedesstr.15 D - 70372 STUTTGART Telefon +49(0)711 / 9544-950 Telefax +49(0)711 / 9544-941 info@columbus-clean.com www.columbus-clean.com 1.4 Type plate In compliance with the Machine Directive 2006/42/CE on vacuum cleaners, the machine is fitted with CE plates. -
Page 7: Intended Uses
Industrial vacuum cleaner IWV 40/100 1.5 Intended uses These specific vacuum cleaner models have been designed, built and protected for vacuuming dusts and solid materials only, using special filters. Warning! Always use specific filters for the type of dust or materials to be vacuumed. -
Page 8: Technical Details
Industrial vacuum cleaner IWV 40/100 1.10 Technical details 3,45 Power Volt 230-50/60 Voltage mm / H 2.300 Max. vacuums rate m³ / h Max. air flow rate dB (A) Noise level Polyester Filter type Capacity (swarf) Capacity (liquid) Ø Suction inlet... -
Page 9: Safety
They should also have the tools necessary to perform these duties properly. columbus shall under no circumstances be deemed liable for accidents or damage caused by use of the vacuum cleaner by personnel not properly trained or who use it in an improper manner, as well as by even partial failure to comply with the safety regulations and intervention procedures indicated in this manual. -
Page 10: Safety Warnings
Industrial vacuum cleaner IWV 40/100 2.2 Safety warnings Attention! The following indications are, by themselves, not enough to fully protect against all the hazards that could arise during vacuum cleaner operation. These will have to be integrated with common sense and the experience of the operator, both of which are crucial factors for preventing accidents. - Page 11 Exploded Spare Parts drawing, Declaration of Conformity. In the event of Customers fitting a tool to the machine not supplied by columbus, make sure the safety conditions required by Machine Directive 2006/42/CE are complied with and in any event, columbus is unable to accept liability for any problems arising from use of such tool.
- Page 12 Industrial vacuum cleaner IWV 40/100 Climbing on the cleaner is forbidden. Never touch electric wires, switches, buttons, etc. with wet hands. Before connecting to the power mains, make sure the power voltage and frequency are those shown on the machine plate.
-
Page 13: Safety Plates And Symbols
Clean these with a cloth, soap and water. Do not use solvents, diesel fuel or petrol. Replace the damaged plates with new ones supplied by columbus. If a plate is affixed to a replaced part, make sure a new plate is affixed to the new part. -
Page 14: Outstanding Risks
Industrial vacuum cleaner IWV 40/100 2.4 Outstanding risks Careful analysis of risks performed by the manufacturer and stored in the technical file has made it possible to eliminate most of the risks associated with vacuum cleaner operation. The manufacturer advises carefully following the instructions, procedures and advice contained in this manual as well as applicable safety regulations, including the use of the envisaged protection devices, both those integrated in the cleaner and individual. -
Page 15: Installation
Industrial vacuum cleaner IWV 40/100 3 Installation 3.1 Handling Weight (incl. packaging) (cm) (cm) (cm) IWV 40/100 The machine is supplied in a strong cardboard box secured with straps. Transport the package using a fork-lift truck of adequate lifting capacity and make sure it is stable and that weight is properly distributed on the forks. -
Page 16: Installation
Industrial vacuum cleaner IWV 40/100 3.2 Installation Warning! Before installing the vacuum cleaner, carefully make a sight check to pinpoint any damage suffered during transport. In the event of any component parts being damaged, do not proceed with installation. Notify the manufacturer and reach an agreement on how to proceed. - Page 17 Industrial vacuum cleaner IWV 40/100 Fit the supplied pipe on the connector. Make sure the power supply corresponds to the voltage and frequency indicated on the vacuum cleaner plate. Warning! Do not fit the plug in the power socket with wet hands.
-
Page 18: Operation
Industrial vacuum cleaner IWV 40/100 4 Operation 4.1 Description of controls 1) START / STOPP switch (Motor 1) 2) START / STOPP switch (Motor 2) 3) START / STOPP switch (Motor 3) 4) Power on – red light indicator 5) Vacuum meter... -
Page 19: Work Cycle
Industrial vacuum cleaner IWV 40/100 4.2 Work cycle Warning! Before fitting the plug, make sure the power voltage corresponds to that on the CE marking plate. Make sure the power plug is correctly fitted in the power socket. Make sure the flexible hose is properly fitted and locked in the vacuum pipe union. - Page 20 Industrial vacuum cleaner IWV 40/100 To move the vacuum cleaner, use the large handle. Warning! The vacuum can be moved only on flat ground! If the vacuum is moved on inclined grounds, you can risk to lose the control, because of the weight and to damage persons or things.
-
Page 21: Releasing And Removing The Removable Container
Industrial vacuum cleaner IWV 40/100 4.3 Releasing and removing the removable container Stop the vacuum motors by pressing the relevant STOP buttons. Warning! Disconnect the plug from the power socket. Lift the lever located in the bottom part of the cleaner to release and remove the container. -
Page 22: Maintenance
Industrial vacuum cleaner IWV 40/100 5 Maintenance 5.1 Informative notes This section describes the control and special maintenance operations crucial for keeping the vacuum cleaner in perfect working condition. Any other jobs which might be necessary to eliminate operating faults must be expressly authorised by the manufacturer. -
Page 23: Maintenance Operations
If the flexible hose is perforated, the power of the cleaner will be reduced and dust and liquids will leak into the environment. Warning! All maintenance and repair jobs must be performed directly by columbus or its authorised dealers. -
Page 24: Replacing The Filters
Industrial vacuum cleaner IWV 40/100 5.4 Replacing the filters To replace the filters, proceed as follows: Turn off the vacuum cleaner by pressing the motor STOP buttons. Disconnect the vacuum cleaner plug from the power socket. Important! Wear individual protection devices. - Page 25 Industrial vacuum cleaner IWV 40/100 Loosen the clamp and remove the support ring with seal. Fit the new filter and put everything back in place, locking the cap. Important! All the material trapped by the filter and the filter itself must be disposed of through authorised channels in the country where the vacuum cleaner is used.
-
Page 26: Troubleshooting
Check the seals and, if Seals worn necessary, replace it. Check for any air leaks out of closing fasteners, tightening Airleak screws, container or filter chamber. Contact columbus after-sales. Motor very noisy Warning! For any other problems, contact the columbus after-sales service. -
Page 27: Recommended Spare Parts
Industrial vacuum cleaner IWV 40/100 6 Recommended spare parts Code Description POLYESTERFILTER Ø 500 H100 21478300 FILTERDICHTUNG Ø500 21479100 FILTERKLEMME Ø500 21487000... -
Page 28: Declaration Of Conformity
Industrial vacuum cleaner IWV 40/100 7 Declaration of conformity in accordance with the EC Directive on Machines 2006/42/EC Manufacturer G. Staehle GmbH u. Co. KG columbus Reinigungsmaschinen Mercedesstraße 15 D-70372 Stuttgart hereby declares that the following product conforms to the regulations of the above mentioned directive –... - Page 29 Industrial vacuum cleaner IWV 40/100 Notes...
- Page 30 Industrial vacuum cleaner IWV 40/100 Notes...
- Page 31 Industrial vacuum cleaner IWV 40/100...
- Page 32 G. Staehle GmbH u. Co. KG columbus Reinigungsmaschinen Mercedesstr.15 D - 70372 STUTTGART Telefon +49(0)711 / 9544-950 Telefax +49(0)711 / 9544-941 info@columbus-clean.com www.columbus-clean.com...
Need help?
Do you have a question about the IWV 40/100 and is the answer not in the manual?
Questions and answers