Drive M Otor Replacement - Samsung M 735 Service Manual

4-5 Replacement of Control Panel
1. Disconnect the connectors from the control panel and wire leade.
2. Remove two(2) screws securing the control panel attached to the oven cavity.
3. Remove one screw securing the ground tail of key board.
4. Remove the timer knob of the control box Ass'y.
5. Remove three(3) screw securing the timer.
4-5-1 Removal of Push Button
1. With a flat screwdriver remove push button from
control panel. (The this time button spring is also
removed.)
2. When assembling, first insert button spring and
push button to match with hooks.

4-6 Drive M otor Replacement

1. Take out the glass tray, guide roller and
coupler from cavity.
2. Turn the oven upside down to replace the
drive motor.
3. Cut out the drive motor cover with nipper
and remove it from the base plate.
4. Disconnect all the lead wires from the drive
motor.
5. Remove serews securing the drive motor to
the cavity.
6. Take out the drive motor.
7. When replacing th drive motor, be sure to
remount it in the correct position.
8. Connect all the leads to the drive motor.
9. Screw the drive motor cover to the base plate
with a screw driver.
10. Remount the coupler in the correct position.
Samsung Electronics
Flat
Control Palel Screw driver
(Rear)
Screw
Drive M otor Cover
Disassembly &ReaAssembly
Push Button
Drive M otor
Base Plate
4-3