Memory Allocation - Royal 220DX Operation Manual

4 MEMORY ALLOCATION

Using this function, user can redefine the amount of department no. clerk no. table no.etc.
After this operation, the ECR will do the all clear operation automatically, so it is better to
print whole report before do it.
Procedure:
Switch the control lock to the Prog mode.
(501)  [qty/time] (Redefine parameters)[subttl][check]
The parameters to redefine in Retail Mode and Restaurant Mode are as follows:
Retail Mode
Parameters Default Set
Department 16
Clerk 10
PLU 500
Note:
① Department
There are 8 standard keys on the keyboard and can be extended via [dept
shift] key to support 16 departments.
② PLU ***
The total number of PLUs available values are allocated automatically, after
the previous items are decision. So it cannot enter manually.
Comments for steps:
1. Starting at the department's field, enter the quantity of each memory variable. Press
[subttl] key, after each entry, and will move to the next variable.
2. If you press [TOTAL] key, at any parameter you will abort memory allocation
processes without making changes.
3. Continue filling each variable until complete. If you wish to implement the new
allocation you have entered, press [check] key.
4. The message "ALLOC SUrE" will be displayed.
5. Press [subttl]key to confirm.(Other function keys to discard)
6. The display will monitor the memory clear processes. When complete, it will print one
receipt, which shows the detail information.
Repeat to program next
Max. No. Parameters
①
Department
16
10 Clerk
②
Table
***
PLU
10
Restaurant Mode
Default Set Max.No.
16
16
10 10
40 40
357
***
①
②