Auto Mode Display; Explanation Of The Changing Displays In The Text Line - Theben TR top2 Manual

6. Auto mode display

6.1. Explanation of the changing displays in the text line

(Change approx. every 12 seconds)
o
o
Example for the change displays:

No special fade-in
o
Channel 1  Date  No mains  Channel 2  Date  No mains  Channel 1

with special fade-in (Channel 2 permanent switching activated)
o
Channel 1  Date  No mains  C2 Duration  Date  No mains  Channel 1
Change displays single channel time switch:

Base status: The text line displays the date and the bar
graph the switching times for the current day.

If there is no mains voltage after 12 seconds NO MAINS is
shown for 3 seconds.

If the manual switching or the permanent switching has
been activated, the relevant special fade-in appears in the
text line.
Change displays 2-channel time switch:

Base status: The channel number (CHANNEL 1) is shown
for 12 seconds and in the bar graph display the switching
times for the current day are displayed. The date is then
faded in for 3 seconds and the bar graph display is
deleted. After this there is a change to the next channel
(CHANNEL 2).

If there is no mains voltage NO MAINS is faded in for 3
seconds after both channels have been shown.

By pressing push buttons ◄ and ► the display
immediately changes to the other channel.

If the manual switching or the permanent switching has
been activated the relevant special fade-in appears in the
text line.
Page | 13